The Four Leaf fishpacking plant terminal entries are a series of entries found on three terminals in the Four Leaf fishpacking plant in Fallout 4.
Terminal[]
Note: This desk terminal is located on the desk at the western end of the main floor of the assembly line, next to the locked cage. It is locked with a Novice lock.
Welcome to ROBCO Industries (TM) Termlink
Note: This is the default header of the command program.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) Charging/Inactive
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This is the header of the command program once the Protectron(s) is active.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) Patrolling/Active
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This is the header of the command program after activating the Protectron(s) but before they leave the pod.
Standard Protectron Control Interface v2.40
This interface should be used by RobCo-licensed technicians only. Improper tampering with Protectron units may lead to permanent injury.
STATUS: Unit(s) BUSY
CONNECTED: <Token.ValueInt=Connected> Unit(s) Connected to this terminal
Please choose an option:
> Loading Interface...
Note: This header of the command program is displayed once the Protectron(s) is no longer within the Protectron pod.
! ERROR ! !
Protectron unit absent or damaged!
> Loading Interface...
Activate Unit(s)[]
Note: This is the default command of the command program.
...Accessing pod...
...Initializing unit...
...Loading assigned subroutines...
Please advise any personnel standing near charge pod to make way.
> Exiting Charge Pod
Shut-Down Unit(s)[]
Note: This command is available once the Protectron(s) are activated.
...Accessing pod...
...Pinging Protectron Unit...
...Broadcasting shut-down signal...
Please ensure that Charge Pod is unobstructed.
> Returning to Charge Pod
Choose Personality Mode[]
> Loading Personality Matrices...
Default[]
Personality paramenter reset.
> Resetting Personality Parameter...
Subway Steward[]
Personality paramenter reset.
> Resetting Personality Parameter...
Law Enforcement[]
Personality paramenter reset.
> Resetting Personality Parameter...
Fire Brigadier[]
Personality paramenter reset.
> Resetting Personality Parameter...
Medical Responder[]
Personality paramenter reset.
> Resetting Personality Parameter...
Construction Worker[]
Personality paramenter reset.
> Resetting Personality Parameter...
Note: This header is displayed if the door is locked.
MaxLock Security Door Control Interface
STATUS: Locked
Note: This header is displayed if the door is opening.
MaxLock Security Door Control Interface
STATUS: Busy
Note: This header is displayed if the door is unlocked.
MaxLock Security Door Control Interface
STATUS: Unlocked
Open Door[]
Security lock released. Opening doors...
> Accessing Maglocks...
Close Door[]
Security lock engaged. Sealing doors...
> Initializing Maglocks...
Terminal[]
Note: This wall terminal is located on the balcony above the main entrance of the facility. It is locked with a Master lock, although it can also be accessed with the Four Leaf security password.
Welcome to ROBCO Industries (TM) Termlink
==============================================
Four Leaf Fishpacking Security Terminal
==============================================
Open Security Door[]
Note: Accessing this command opens the hidden door to Marowski's chem lab.
Close Security Door[]
Note: Accessing this command closes the hidden door to Marowski's chem lab.
Terminal[]
Note: This wall terminal is located on the western wall of Marowski's chem lab.
Welcome to ROBCO Industries (TM) Termlink
> Remote Door Control[]
Note: This is the default header for the remote door program.
Remote Door Control Interface
STATUS: Closed
Note: This is the header once the remote door is opened.
Remote Door Control Interface
STATUS: Open
Open Door[]
Opening doors...
> Accessing Door...
Close Door[]
Sealing doors...
> Initializing Door...