Jump to content

Phosphine oxides

From Wikipedia, the free encyclopedia
General formula of organophosphine oxides

Phosphine oxides are phosphorus compounds with the formula OPX3. When X = alkyl or aryl, these are organophosphine oxides. Triphenylphosphine oxide is an example. An inorganic phosphine oxide is phosphoryl chloride (POCl3).[1] The parent phosphine oxide (H3PO) remains rare and obscure.

Structure and bonding

[edit]

Tertiary phosphine oxides

[edit]
Principal resonance structures for phosphine oxides.

Tertiary phosphine oxides are the most commonly encountered phosphine oxides. With the formula R3PO, they are tetrahedral compounds. They are usually prepared by oxidation of tertiary phosphines. The P-O bond is short and polar. According to molecular orbital theory, the short P–O bond is attributed to the donation of the lone pair electrons from oxygen p-orbitals to the antibonding phosphorus-carbon bonds.[2] The nature of the P–O bond was once hotly debated. Some discussions invoked a role for phosphorus-centered d-orbitals in bonding, but this analysis is not supported by computational analyses. In terms of simple Lewis structure, the bond is more accurately represented as a dative bond, as is currently used to depict an amine oxide.[3][4]

Secondary phosphine oxides

[edit]

Secondary phosphine oxides (SPOs), formally derived from secondary phosphines (R2PH), are again tetrahedral at phosphorus.[5] One commercially available example of a secondary phosphine oxide is diphenylphosphine oxide. SPOs are used in the formulation of catalysts for cross coupling reactions.[6]

Unlike tertiary phosphine oxides, SPOs often undergo further oxidation, which enriches their chemistry:

R2P(O)H + H2O2 → R2P(O)OH + H2O

These reactions are preceded by tautomerization to the phosphinous acid (R2POH):

R2P(O)H R2POH

Primary phosphine oxides

[edit]

Primary phosphine oxides, formally oxidized derivatives of primary phosphines, are again tetrahedral at phosphorus. With four different substituents (O, OH, H, R) they are chiral. The primary phosphine oxides subject to tautomerization, which leads to racemization, and further oxidation, analogous to the behavior of SPOs. Additionally, primary phosphine oxides are susceptible to disproportionation to the phosphinic acid and the primary phosphine:[7]

2 RP(O)H2 → RP(O)(H)OH + 2 RPH2

Syntheses

[edit]

Phosphine oxide are typically produced by oxidation of organophosphines. The oxygen in air is often sufficiently oxidizing to fully convert trialkylphosphines to their oxides at room temperature:

R3P + 1/2 O2 → R3PO

This conversion is usually undesirable. In order to suppress this reaction, air-free techniques are often employed when handling say, trimethylphosphine.

Less basic phosphines, such as methyldiphenylphosphine are converted to their oxides by treatment with hydrogen peroxide:[8]

PMePh2 + H2O2 → OPMePh2 + H2O

Phosphine oxides are generated as a by-product of the Wittig reaction:

R3PCR'2 + R"2CO → R3PO + R'2C=CR"2

Another albeit unconventional route to phosphine oxides is the thermolysis of phosphonium hydroxides:

[PPh4]Cl + NaOH → Ph3PO + NaCl + PhH

The hydrolysis of phosphorus(V) dihalides also affords the oxide:[9]

R3PCl2 + H2O → R3PO + 2 HCl

A special nonoxidative route is applicable secondary phosphine oxides, which arise by the hydrolysis of the chlorophosphine. An example is the hydrolysis of chlorodiphenylphosphine to give diphenylphosphine oxide:

Ph2PCl + H2O → Ph2P(O)H + HCl

Reactions

[edit]

Complexes

[edit]

Transition metal complexes of phosphine oxides are numerous.

Deoxygenation

[edit]

The deoxygenation of phosphine oxides has been extensively developed because many useful stoichiometric reactions convert tertiary phosphines to the corresponding oxides. Regeneration of the tertiary phosphine requires cheap oxophilic reagents, which are usually silicon-based. These deoxygenation reactions can be subdivided into stoichiometric and catalytic processes.[10]

Stoichiometric processes

[edit]

Use of trichlorosilane is a standard laboratory method. Industrial routes use phosgene or equivalent reagents, which produce chlorotriphenylphosphonium chloride, which is separately reduced.[11] For chiral phosphine oxides, deoxygenation can proceed with retention or inversion of configuration. Classically, inversion is favored by a combination of trichlorosilane and triethylamine, whereas in the absence of the Lewis base, the reaction proceeds with retention.[12]

HSiCl3 + Et3N ⇋ SiCl3 + Et3NH+
R3PO + Et3NH+ ⇋ R3POH+ + Et3N
SiCl3 + R3POH+ → PR3 + HOSiCl3

The popularity of this method is partly attributable to the availability of inexpensive trichlorosilane. Instead of HSiCl3, other perchloropolysilanes, e.g. hexachlorodisilane (Si2Cl6), can also be used. In comparison, using the reaction of the corresponding phosphine oxides with perchloropolysilanes such as Si2Cl6 or Si3Cl8 in benzene or chloroform, phosphines can be prepared in higher yields.

R3PO + Si2Cl6 → R3P + Si2OCl6
2 R3PO + Si3Cl8 → 2 R3P + Si3O2Cl8

Deoxygenation has been effected with boranes and alanes.[10]

Catalytic processes

[edit]

Phosphoric acids ((RO)2PO2H) catalyze the deoxygenation of phosphine oxides by hydrosilanes.[13]

Use

[edit]

Phosphine oxides are ligands in various applications of homogeneous catalysis. In coordination chemistry, they are known to have labilizing effects to CO ligands cis to it in organometallic reactions. The cis effect describes this process.

References

[edit]
  1. ^ D. E. C. Corbridge "Phosphorus: An Outline of its Chemistry, Biochemistry, and Technology" 5th Edition Elsevier: Amsterdam 1995. ISBN 0-444-89307-5.
  2. ^ D. B. Chesnut (1999). "The Electron Localization Function (ELF) Description of the PO Bond in Phosphine Oxide". Journal of the American Chemical Society. 121 (10): 2335–2336. doi:10.1021/ja984314m.
  3. ^ Gilheany, Declan G. (1994). "No d Orbitals but Walsh Diagrams and Maybe Banana Bonds: Chemical Bonding in Phosphines, Phosphine Oxides, and Phosphonium Ylides". Chemical Reviews. 94 (5): 1339–1374. doi:10.1021/cr00029a008. PMID 27704785.
  4. ^ In fact, the N-O bonds in amine oxides are more likely to be closer to double bonds than are those of the P-O bonds in phosphine oxides; see e.g. https://pubs.rsc.org/en/content/articlelanding/2015/sc/c5sc02076j#:~:text=Quantitative%20analysis%20of%20known%20species%20of%20general%20formulae,high%20degree%20of%20covalent%20rather%20than%20ionic%20bonding.
  5. ^ Gallen, Albert; Riera, Antoni; Verdaguer, Xavier; Grabulosa, Arnald (2019). "Coordination Chemistry and Catalysis with Secondary Phosphine oxides". Catalysis Science & Technology. 9 (20): 5504–5561. doi:10.1039/C9CY01501A. hdl:2445/164459. S2CID 202885438.
  6. ^ Ackermann, Lutz (2007). "Catalytic Arylations with Challenging Substrates: From Air-Stable HASPO Preligands to Indole Syntheses and C-H-Bond Functionalizations". Synlett. 2007 (4): 0507–0526. doi:10.1055/s-2007-970744.
  7. ^ Horký, Filip; Císařová, Ivana; Štěpnička, Petr (2021). "A Stable Primary Phosphane Oxide and Its Heavier Congeners". Chemistry – A European Journal. 27 (4): 1282–1285. doi:10.1002/chem.202003702. PMID 32846012. S2CID 221346479.
  8. ^ Denniston, Michael L.; Martin, Donald R. (1977). Methyldiphenylphosphine Oxide and Dimethylphenylphosphine Oxide. Inorganic Syntheses. Vol. 17. pp. 183–185. doi:10.1002/9780470132487.ch50. ISBN 9780470132487.
  9. ^ W. B. McCormack (1973). "3-Methyl-1-Phenylphospholene oxide". Organic Syntheses; Collected Volumes, vol. 5, p. 787.
  10. ^ a b Podyacheva, Evgeniya; Kuchuk, Ekaterina; Chusov, Denis (2019). "Reduction of phosphine oxides to phosphines". Tetrahedron Letters. 60 (8): 575–582. doi:10.1016/j.tetlet.2018.12.070. S2CID 104364715.
  11. ^ van Kalkeren, Henri A.; van Delft, Floris L.; Rutjes, Floris P. J. T. (2013). "Organophosphorus Catalysis to Bypass Phosphine Oxide Waste". ChemSusChem. 6 (9): 1615–1624. doi:10.1002/cssc.201300368. hdl:2066/117145. ISSN 1864-5631. PMID 24039197.
  12. ^ Klaus Naumann; Gerald Zon; Kurt Mislow (1969). "Use of hexachlorodisilane as a reducing agent. Stereospecific deoxygenation of acyclic phosphine oxides". Journal of the American Chemical Society. 91 (25): 7012–7023. doi:10.1021/ja01053a021.
  13. ^ Li, Yuehui; Lu, Liang-Qiu; Das, Shoubhik; Pisiewicz, Sabine; Junge, Kathrin; Beller, Matthias (2012). "Highly Chemoselective Metal-Free Reduction of Phosphine Oxides to Phosphines". Journal of the American Chemical Society. 134 (44): 18325–18329. doi:10.1021/ja3069165. ISSN 0002-7863. PMID 23062083.