Portuguese units of measurement

Portuguese units were used in Portugal, Brazil, and other parts of the Portuguese Empire until the adoption of the metric system in the 19th century and have continued in use in certain contexts since.

King Manuel I, who fixed the country's measurement standards, in 1499–1504.

The various systems of weights and measures used in Portugal until the 19th century combine remote Roman influences with medieval influences from northern Europe and Islam.[1] These influences are obvious in the names of the units. The measurement units themselves were, in many cases, inherited from a distant past. From the Romans, Portugal inherited names like palmo (Latin: palmus), côvado (Latin: cubitus), libra, onça (Latin: uncia), moio (Latin: modius), quarteiro (Latin: quartarius), sesteiro (Latin: sextarius). From medieval northern Europe, Portugal inherited names like marco (English: mark, French: marc), búzio (English: bushel, French: boisseau), tonel (English: tun, French: tonneau), pinta (English: pint, French: pinte), choupim (Fr. French: chopine), etc. From the Moors, Portugal receive unit names like arrátel (Arabic: ratl), arroba (Arabic: rub), quintal (Arabic: qintar), alqueire (Arabic: kayl), almude (Arabic: mudd), fanega (Arabic: faniqa), cafiz (Arabic: qafiz), etc. The Roman and northern European influences were more present in the north. The Islamic influence was more present in the south of the country. Fundamental units like the alqueire and the almude were imported by the northwest of Portugal in the 11th century, before the country became independent of León.

The gradual long-term process of standardization of weights and measures in Portugal is documented mainly since the mid-14th century.[2] In 1352, municipalities requested standardization in a parliament meeting (Cortes). In response, Afonso IV decided to set the alna (aune) of Lisbon as standard for the linear measures used for color fabrics across the country. A few years later, Pedro I carried a more comprehensive reform, as documented in the parliament meeting of 1361: the arrátel folforinho of Santarém should be used for weighing meat; the arroba of Lisbon would be the standard for the remaining weights; cereals should be measured by the alqueire of Santarém; the almude of Lisbon should be used for wine. With advances, adjustments and setbacks, this framework predominated until the end of the 15th century.

In 1455, Afonso V accepted the coexistence of six regional sets of standards: Lisbon, Santarém, Coimbra, Porto, Guimarães and Ponte de Lima. Two important weight standards coexisted, one given by the Colonha mark (variant of the Cologne mark), and another given by the Tria mark (variant of the Troyes mark). Colonha was used for precious metals and coinage and Tria was used for haver-de-peso (avoirdupois). The Tria by mark was abolished by João II in 1488.

The official system of units in use in Portugal from the 16th to the 19th century was the system introduced by Manuel I around 1499–1504.[3] The most salient aspect of this reform was the distribution of bronze weight standards (nesting weight piles) to the cities and towns of the kingdom. The reform of weights is unparalleled in Europe until this time, due to the number of distributed standards (132 are identified), their sizes (64 to 256 marks) and their elaborate decoration. In 1575, Sebastian I distributed bronze standards of capacity measures to the main towns.[4] The number of distributed standards was smaller and uniformity of capacity measures was never achieved.

The first proposal for the adoption of the decimal metric system in Portugal appears in Chichorro's report on weights and measures (Memória sobre Pesos e Medidas, 1795 [5]). Two decades later, in 1814, Portugal was the second country in the world – after France itself – to officially adopt the metric system.[6] The system then adopted reused the names of the Portuguese traditional units instead of the original French names (e.g.: vara for metre; canada for litre; and libra for kilogram). However, several difficulties prevented the implementation of the new system and the old Portuguese customary units continued to be used, both in Portugal and in Brazil (which became an independent country in 1822). The metric system was finally adopted by Portugal and its remaining colonies in 1852, this time using the original names of the units. Brazil continued to use the Portuguese customary units until 1862, only then adopting the metric system.

Route units

edit
Portuguese name English name Subdivides in Equivalence in
Léguas de 20 ao grau
Metric equivalence
Légua de 18 ao grau League of 18 to the degree 20/18 (≈1,11) 6 173 m
Légua de 20 ao grau League of 20 to the degree 3 milhas geográficas 1 5 555 m
Milha geográfica Geographical mile 1/3 1 852 m

Length units

edit
Portuguese name English name Subdivides in Equivalence in varas Metric equivalence
Braça Fathom 2 varas 2 2.2 m
Toesa Toise 6 pés 1+45 1.98 m
Passo geométrico Geometrical pace 5 pés 112 1.65 m
Vara Yard 5 palmos 1 1.1 m
Côvado Cubit 3 palmos 35 0.66 m
Foot 12 polegadas 310 0.33 m
Palmo de craveira Span 8 polegadas 15 0.22 m
Polegada Inch 12 linhas 140 27.5 mm
Linha Line 12 pontos 1480 2.29 mm
Ponto Point 15760 0.19 mm

Mass units

edit
Portuguese name English name Subdivides into Equivalence in arráteis Metric equivalence
Tonelada Tonne 13.5 quintais 1728 793,152 g
Quintal Hundredweight 4 arrobas 128 58,752 g
Arroba Arroba 32 arráteis 32 14,688 g
Arrátel Pound 4 quartas 1 459 g
Marco Mark 8 onças 12 229.50 g
Quarta Quarter 4 onças 14 114.75 g
Onça Ounce 8 oitavas 116 28.6875 g
Oitava Dram 3 escrópulos 1128 3.5859 g
Escrópulo Scruple 24 grãos 1384 1.1953 g
Grão Grain 19216 0.0498 g

Volume units

edit
Portuguese name English name Subdivides in Equivalence in canadas Metric equivalence
Tonel Tun 2 pipas 600 840 L
Pipa Pipe 25 almudes 300 420 L
Almude Modius 2 potes 12 16.8 L
Pote Pot 6 canadas 6 8.4 L
Canada Quart 4 quartilhos 1 1.4 L
Quartilho Pint[7] 2 meios quartilhos 14 0.35 L
Meio quartilho Half-Pint 18 0.175 L

See also

edit

References

edit


References

edit
  1. ^ Pinto, 1986; Seabra Lopes, 2000; Seabra Lopes, 2005.
  2. ^ Trigoso, 1815; Gama Barros, [1922]–1950; Seabra Lopes, 2003; Seabra Lopes, 2005.
  3. ^ Seabra Lopes, 2003; Seabra Lopes, 2018a; Seabra Lopes, 2019.
  4. ^ Seabra Lopes, 2003.
  5. ^ Seabra Lopes, 2018b.
  6. ^ Silva Lopes, 1849; Paixão et al., 2006; Branco, 2005.
  7. ^ Cognate with quart, but a quarter of the canada rather than the gallon. The English quart is closer to the canada in size. The quartilho is a little less than two thirds of an imperial pint or three quarters of a US liquid pint.