Connectionless communication

Connectionless communication, often referred to as CL-mode communication,[1] is a data transmission method used in packet switching networks, using data packets that are frequently called datagrams, in which each data packet is individually addressed and routed based on information carried in each packet, rather than in the setup information of a prearranged, fixed data channel as in connection-oriented communication. Connectionless protocols are usually described as stateless protocols, the Internet Protocol (IP) and User Datagram Protocol (UDP) are examples.

Attributes

edit

Under connectionless communication between two network endpoints, a message can be sent from one endpoint to another without prior arrangement. The device at one end of the communication transmits data addressed to the other, without first ensuring that the recipient is available and ready to receive the data. Some protocols allow for error correction by requesting retransmission.

Connectionless protocols are stateless protocols because the endpoints have no protocol-defined way to remember where they are in a "conversation" of message exchanges. It has lower overhead than connection-oriented communication because, in connection-oriented communication, the communicating peers must first establish a logical or physical data channel or connection in a dialog preceding the exchange of user data. It allows for multicast and broadcast operations in which the same data are transmitted to several recipients in a single transmission.

In connectionless transmissions the service provider usually cannot guarantee that there will be no loss, error insertion, misdelivery, duplication, or out-of-sequence delivery of the packet. However, the effect of errors may be reduced by implementing error correction within an application protocol.

In connectionless mode, there is less opportunity for optimization when sending several data units between the same two peers. By establishing a connection at the beginning of such a data exchange the components (routers, bridges) along the network path would be able to pre-compute (and hence cache) routing-related information, avoiding re-computation for every packet. In connection-oriented communication, network components can also reserve capacity for the transfer of the subsequent data units of a video download, for example.

Architecture and implementations

edit

Distinction between connectionless and connection-oriented transmission may take place at several layers of the OSI Reference Model:

Notable connectionless protocols are: Internet Protocol (IP), User Datagram Protocol (UDP), Internet Control Message Protocol (ICMP), Internetwork Packet Exchange (IPX), Transparent Inter-process Communication, NetBIOS, and Fast and Secure Protocol (FASP).

References

edit
  1. ^ Information Processing Systems - Open Systems Interconnection, "Transport Service Definition - Addendum 1: Connectionless-mode Transmission", International Organization for Standardization, International Standard 8072/AD 6, December 1986.
  •   This article incorporates public domain material from Federal Standard 1037C. General Services Administration. Archived from the original on 2022-01-22.